常州廣場地坪*** 400-0709-910(請撥打400-0709-910電話，永堅地坪公司)
施工要求
養護期：對于新水泥地面或新水磨石地面，要求養護28天以上，含水率在8%以下。
強度：C-25以上。
含水率：8%以下。
平整度：2-3mm/2M以內。
室內環境濕度85%，**施工溫度10℃以上。
400-0709-910(請撥打400-0709-910電話，永堅地坪公司)
四、施工工具
地坪打磨機，吸塵器、鋸齒鏝刀、平底刮板、輥筒與漆刷、砂漿攪拌機、底材表面溫度及環境溫濕度儀、
基材含水率測定儀、稱量與攪拌工具、切縫機與打膠槍、清洗工具。
400-0709-910(請撥打400-0709-910電話，永堅地坪公司)
五、施工工藝
1、素地處理：依素地狀況做好修補，打磨，除塵;
2、環氧底漆：采用封閉性及附著力特強環氧底漆滾涂一道，增強表面附著力;
3、環氧中涂：將環氧樹脂加入適量的石英砂，用鏝刀將其均勻涂布數道;
400-0709-910(請撥打400-0709-910電話，永堅地坪公司)
4、環氧批土：依實際需要施工數道，要求達到平整無孔洞，無批刀印及砂磨印為準;
400-0709-910(請撥打400-0709-910電話，永堅地坪公司)
5、環氧面漆：溶劑型環氧面漆或止滑面漆滾涂二道，完工后整體地面光亮潔凈，顏色均一，無空鼓;
6、施工完成：24小時后方可上人，7天后方可重壓。（25℃為準，低溫開放時間需適度延長）
Construction requirements
Maintenance period: For a new concrete floor or a new terrazzo floor, the conservation of more than 28 days, moisture content below 8%.
Strength: C-25 and above.
Moisture content: 8%.
Flatness: 2-3mm / 2M or less.
Indoor humidity of 85%, the best construction temperature above 10 ℃.
400-0709-910 (please call 400-0709-910 phone, Wing-kin flooring company)
Fourth, construction tools
Floor polishing machines, vacuum cleaners, serrated trowel, flat blade, roller and paint brush, mortar mixer, the substrate surface temperature and ambient temperature and humidity instrument,
Substrate moisture analyzer, weighing and mixing tools, cutting sewing machine with a plastic gun, cleaning tools.
400-0709-910 (please call 400-0709-910 phone, Wing-kin flooring company)
Five, construction technology
1, elements to deal with: according to the situation plain good repair, sanding, dust;
2, epoxy primer: use closed and particularly strong adhesion roll an epoxy primer to enhance the surface adhesion;
3, epoxy coating: epoxy resin adding an appropriate amount of quartz sand, with a trowel to evenly coated with the number of road;
400-0709-910 (please call 400-0709-910 phone, Wing-kin flooring company)
4, epoxy approved soil: according to the actual needs of the number of road construction required to achieve smooth and no holes, no batch of knives and sanding print prevail;
400-0709-910 (please call 400-0709-910 phone, Wing-kin flooring company)
5, epoxy finish: Solvent-slip epoxy paint or paint roller two, after completion of the overall surface bright and clean, color uniform, no hollowing;
6. Construction complete: 24 hours before the Master, seven days before stress. (25 ℃ prevail, low temperature for an appropriate extension of the opening hours)
資訊來源：<聯系電話:400-0709-910>
|
您當前的位置: 首頁 > 行業資訊
